Microsquirt Wiring Harness Diagram, Schematic & Example — Pre-Wired Base Layout
Pre-wired schematic diagram and complete wiring harness example for the Microsquirt — ready to inspect and customize.
This Microsquirt harness example includes all pre-wired connections, connectors, and pin mappings ready to customize. Open Harness Example in Wiringly
(Click image to view full-resolution harness diagram)Example Specifications & Metadata
| Property | Specification Details |
|---|---|
| Harness Example Name | Microsquirt Template |
| Primary Category | Megasquirt |
| Device Modules | 22 modules |
| Total Connector Pins | 93 pins |
| Wiring Status | 47 pre-wired connection(s) |
Included Devices & Connectors
The table below summarizes all hardware modules, sensors, and connectors configured in this Microsquirt wiring harness example:
| Device / Module | Connectors | Total Pins |
|---|---|---|
| Microsquirt | 1 | 35 |
| Bosch Fluid Temperature Sensor M12 | 1 | 2 |
| Bosch Air Temperature Sensor M12 | 1 | 2 |
| BMW E36 325 Throttle position sensor | 1 | 3 |
| DT04-12PA | 1 | 12 |
| DTM06-4S | 1 | 4 |
| Parallel Splice 34130 × 6 | 6 | 6 |
| Ring Terminal M8 × 2 | 2 | 2 |
| Bosch MAP Sensor 0 261 230 119 | 1 | 3 |
| 032905106B VAG Wasted Spark coil | 1 | 4 |
| Generic Injector JPT connector × 4 | 4 | 8 |
| D9 Female | 1 | 9 |
| LinkECU Hall-Sensor | 1 | 3 |
Microsquirt Wiring Harness Example & Intended Application
This wiring harness example provides a complete, production-tested base layout suitable for any 4-cylinder, 4-stroke engine. The included hardware modules reflect what LinkECU Hall-Sensor directly supports, featuring generic, widely available sensors and connectors to keep the harness design broadly adaptable. All wire lengths, routing paths, and pin assignments serve as a reference example that you can customize in the digital builder to match your exact vehicle engine bay layout.
Why Use This Wiring Harness Example as a Reference?
- Verified ECU Pinouts: View standard connector configurations and pin functions for LinkECU Hall-Sensor.
- Wiring & Gauge Guidance: Uses industry-standard wire gauge sizing (mm² / AWG) for power feeds, grounds, CAN-bus networks, and sensor inputs.
- Interactive Canvas Ready: Open this example directly in the Wiringly online software to tweak wire routing, swap sensors, and generate an automated bill of materials (BOM) and wire cutting list.
Open & Customize This Example in Wiringly
Ready to adapt this Microsquirt wiring harness example for your vehicle or engine build?
Related Resources & Guides
- Component Library — search pinouts for ECUs, PDMs, and sensors
- Quick Start Guide — canvas shortcuts and wire drawing instructions
- Wire Management Guide — concentric twisting and thermal calculation guide